Page History

...

            *Caution: Know the definition of "engineering" shear strain,  Wiki Markup{latex}

$\gamma_{xy}$

...

and be careful with the sign of your angle when doing the transformation. 

And finally, think about when whether shear stress or shear strain can be neglected and when that is the case. Final answer: 

Start-Up

This tutorial assumes that you have completed the bike crank tutorial. The ANSYS project file generated from the bike crank tutorial is used as a starting point for this tutorial. The following video will show you how to make a copy of your previous analysis system within the project page. 

{html}<iframe width="600" height="338" src="//www.youtube.com/embed/ntHGCVVPG9Y?rel=0" frameborder="0" allowfullscreen></iframe>{html}

Summary of steps in the above video:

1. Go to Project Schematic where your previous bike crank simulation resides
2. Click on the downward arrow on the leftmost upper of the static structural box
3. Click on Duplicate and rename the second project to Crank part 2

Go to Step 2: Geometry

Go to all ANSYS Learning Modules