Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Include Page
SIMULATION: ANSYS FLUENT Google AnalyticsSIMULATION: ANSYS
FLUENT Google Analytics
Panel

Author: Ranjith Tirunagari, Cornell University

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation

Problem Specification

Include Page
Turbulent Pipe Flow (LES) - Panel
Turbulent Pipe Flow (LES) - Panel

Turbulent Pipe Flow (LES)

Created using ANSYS 13.0

Problem Specification

Consider fluid flowing through Consider a cylindrical pipe of diameter D = 0.0127 m and length L = 5D = 0.0635 m. The bulk velocity through at the pipe inlet is Ubulk = 6.58 m/s. Let us consider the case where the density of the fluid is constant. Take density ρ = 1.331 kg/ m3 and  _and coefficient of viscosity viscosity _µ = 2.34 x 10-3 kg5 kg/(ms). The Reynolds number Re based on the pipe diameter and the bulk velocity is


Solve the above fluid flow problem using the LES capability in FLUENT via ANSYS Workbench. Plot the mean and the root mean square velocities versus the radial distance at a particular x/D downstream of the inlet. Compare the mean velocity obtained from the LES simulation with the mean velocity obtained using the k-ε model.

Go to Step 1 - : Pre-Analysis & Start-Up

Go to all FLUENT Learning Modules