SimCafe

Space shortcuts

Child pages
  • 2D Steady Conduction - Mesh

Versions Compared

Old Version 16

changes.mady.by.user user-ab9f4

Saved on

compared with

New Version 17

changes.mady.by.user user-ab9f4

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

For this simulation we will use a mapped face mesh. A mapped face mesh is that a mesh that can be mapped to a rectangular domain. The domain for this simulation is already rectangular, thus mapped faced meshing will yield a rectangular grid mesh. In order to implement the mapped face meshing, first (Click) Mesh, . Next, (Click) Mesh Control > Mapped Face Meshing, as shown below.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/146918513/MFM_Full.png


Then, click on the rectangle and it should highlight green. If it does not highlight green, click on the face selection filter button, ,then click on the rectangle. Once the rectangle has been selected (Click) Apply in the "Details of Mapped Face Meshing" table as shown below.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/146918513/DMFM_Full.png


Now, (Click) Update, , in order to generate the mesh. You should obtain the following mesh.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/146918513/GenMesh_Full.png


...