Include Page |
---|
...
|
...
|
Panel |
---|
Author: John Singleton, Cornell University Problem Specification |
4. Setup (Physics)
Material Properties
At this point, the material, Cornellium, will be assigned to the geometry. To assign the material, expand Geometry,, in the tree outline. Next, click on Surface Body, . Then set Assignment to Cornellium in the "Details of Surface Body" table, as shown below.
Adiabatic Boundaries
...
https://confluence.cornell.edu/download/attachments/146918515/PerfIns_Full.png
...
Isothermal Boundary
...
https://confluence.cornell.edu/download/attachments/146918515/InsTemp_Full.png
...
https://confluence.cornell.edu/download/attachments/146918515/SetTemp_Full.png
Convective Boundary
...
https://confluence.cornell.edu/download/attachments/146918515/InsConv_Full.png
...
https://confluence.cornell.edu/download/attachments/146918515/DetConv_Full.png
...
Include Page | ||||
---|---|---|---|---|
|
Define Boundary Conditions
HTML |
---|
<iframe width="640" height="360" src="https://www.youtube.com/embed/pG8euuRXOmc" frameborder="0" allowfullscreen></iframe> |
Note
Make sure you have "Celsius" selected as the temperature unit under "Units"
...
Save
Save the project now. Do not close Mechanical.
Go to Step 5: Solution
See and rate the complete Learning ModuleNumerical Solution