Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Mesh
Launch Mechanical
(double click) Model, , in the "Cantilever Modal" project.
Panel |
---|
Author: John Singleton and Rajesh Bhaskaran, Cornell University Problem Specification |
3. Mesh
Open Mechanical
Generate Default Mesh
First, (click on ) Mesh in the tree outline. Next, (click) Mesh > Generate Mesh as shown below.
Size Mesh
In this section we will size the mesh, such that it has ten uniform elements. In order to size the mesh, first expand Sizing located within the
Details of "Mesh" table. Next, set Element Size to 0.40 m.
Details of "Mesh". Then set
Details of "Mesh" table.
, as shown below.
Now, (click) Mesh > Generate Mesh in order to generate the new mesh. You should obtain the mesh, that is shown in the following image.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/145756994/10ElemMesh_Full.png |
Note that in this simulation we are working with beam elements, which are simply line segments. As a visualization tool ANSYS displays a beam with width and height. In order to display the actual mesh (click) View > (deselect) Thick Shells and Beams. You will then see the mesh displayed in its native form.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/145756994/LineMesh_Full.png |
Save
Go to Step 4: Setup (Physics)
See and rate the complete Learning ModulePhysics Setup