Page History

Step 4: Setup (Physics)

We need to specify point BC's at A, B, C and D.

Let's start with setting up boundary condition at A.
Outline > Static Structural (A5) > Insert > Remote Displacement
Select point A in the Graphics window and click Apply next to Geometry under Details of "Remote Displacement". Enter 0 for all UX, UY, UZ, ROTX and ROTY except for ROTZ. Let ROTZ to be free.

Let's move on to setting up boundary condition B.
Outline > Static Structural (A5) > Insert > Remote Displacement
Select point B in the Graphics window and click Apply next to Geometry under Details of "Displacement 2". Enter 0 for all UY, UZ, ROTX and ROTY except for ROTZ. Let UX and ROTZ to be free.

We can move on to setting up point force at point C and D.

Outline > Static Structural (A5) > Insert > Force

Select point C in the Graphics window and click Apply next to Geometry under Details of "Force". Next to Define By, change Vector to Components. Enter -4000 for Y Component.

Do the same for point D.

Check that you have for all the boundary conditions. Click on Static Structural (A5) to view this in Graphics window.

https://confluence.cornell.edu/download/attachments/112041617/Boundary%20condition.png

Go to Step 5: Solution

See and rate the complete Learning Module

Go to all ANSYS Learning Modules