...
Following figure shows the edges with different mesh properties.
(Click picture for larger image)
Label | Edge Mesh Properties |
A | Interval Count: 36, Double First Length: 0.5 |
B | Interval Count: 36, Double First Length: 0.2 |
C | Interval Count: 30, First Length: 0.1 |
D | Interval Count: 18 |
E | Interval Count: 90, First Length: 0.1 |
F | Interval Count: 36 |
G | Interval Count: 72 |
H | Interval Count: 30 |
I | Interval Count: 36, Double First Length: 0.05 |
...
The meshed face should look as follows:
(Click picture for larger image)
Go to Step 3: Specify Boundary Types in GAMBIT
...