Notes

• EMC2's Cisco Tandberg C20 system is nominally supported by Cisco until August 2018.
• One must pay for updates so none applied 4/2/2018.

How to connect the Tandberg C20 to Zoom

• Michael Hint connected the Tandberg to Zoom. Here's how:

0) Get Zoom Meeting

...

ID from meeting organizer

• If presenter is using Cornell's Zoom license, that's all you need to make this work.
• Unknown if and how it will work with a different, non-Cornell licensehttps://support.zoom.us/hc/en-us/articles/203736425-H-323-SIP-Room-Connector-Call-out
• Invite a Room System
Provide Zoom Meeting ID number.

1) Start the Tandberg system

...

• On Tandberg controller, use arrows to navigate, and the center "check mark" to select entries.
• N.B. The Zoom "phone number" (URI) used by Chemistry IT to set up Contact "Zoom" was:
  • 162.255.36.11
  • Example of other iPs

3) Enter Zoom Meeting ID and join the meeting

Press number keys on Tandberg controller.

• Thiis This is a unique 9-digit number for the meeting itself

...

• Control Tandberg camera's direction (left, right, up, down) with arrow keys on Tandberg controller.
• Control Tandberg camera's zooming in and out with the  + and - keys on Tandberg controller.
• Zoom

Unknown how to do computer screen sharing

Seems one can connect a computer to the Tandberg and switch between sharing the computer and your Tandberg video.

• Alternative: May be easier just to get that shared computer at a separate attendee.

Other info

• This is an example of an "H.323 room system", if needing to internet-search Zoom for help.

...

Initial notes, from Oliver:

...