Panel |
---|
Author: Rajesh Bhaskaran & Yong Sheng Khoo, Cornell University Problem Specification |
Step 2: Mesh Geometry in GAMBIT
...
Following figure shows the edges with different mesh properties.
(Click picture for larger image)
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/103729331/step2_img001.jpg?version=3 |
Label | Edge Mesh Properties |
A | Interval Count: 36, Double First Length: 0.5 |
B | Interval Count: 36, Double First Length: 0.2 |
C | Interval Count: 30, First Length: 0.1 |
D | Interval Count: 18 |
E | Interval Count: 90, First Length: 0.1 |
F | Interval Count: 36 |
G | Interval Count: 72 |
H | Interval Count: 30 |
I | Interval Count: 36, Double First Length: 0.05 |
...
Select the face one by one. You can use the defaults of Quad (i.e. quadrilaterals) and Map. Click Apply.
The meshed face should look as follows:
(Click picture for larger image)
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/103729331/step2_img002.jpg?version=1 |
Go to Step 3: Specify Boundary Types in GAMBIT
See and rate the complete Learning Module
...