Panel |
---|
Author: Rajesh Bhaskaran & Yong Sheng Khoo, Cornell University Problem Specification |
Step 2: Mesh Geometry in GAMBIT
...
Following figure shows the edges with different mesh properties.
(Click picture for larger image)
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/103729331/step2_img001.jpg?version=3 |
Label | Edge Mesh Properties |
A | Interval Count: 36, Double First Length: 0.4667 5 |
B | Interval Count: 36, Double First Length: 0.1867 2 |
C | Interval Count: 30, First Length: 0.129 1 |
D | Interval Count: 18 |
E | Interval Count: 90, First Length: 0.1 |
F | Interval Count: 36 |
G | Interval Count: 72 |
H | Interval Count: 30 |
I | Interval Count: 36, Double First Length: 0.04667 05 |
Operation Toolpad > Mesh Command Button > Edge Command Button > Mesh Edges
...
Select the face one by one. The face will change color. You can use the defaults of Quad (i.e. quadrilaterals) and Pave Map. Click Apply.
The meshed face should look as follows:
(Click picture for larger image)
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/103729331/step2_img002.jpg?version=1 |
Go to Step 3: Specify Boundary Types in GAMBIT
See and rate the complete Learning Module
...