Author: Oswaldo Rodriguez
Cornell University

Problem Specification
1. Create Command Log file
2. Modify Log file - part1
3. Modify Log file - part2
4. Solve!
5. Postprocess the results

Problem Specification

Consider the square plate of uniform thickness with a circular hole with dimensions shown in the figure below. The plate is uniaxially loaded with a uniform pressure p=1 MPa. In addition, the plate is made of a Glass/Epoxy composite material with the fibers oriented in same direction as the applied load. The material properties are as follows:

...

The circumferential stress concentration on the boundary of the hole is to be determined using ANSYS.
Go to Step 1: Create Command Log file