Include Page | ||||
---|---|---|---|---|
|
...
Include Page |
---|
...
Author: Ranjith Tirunagari, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
|
Verification & Validation
Step 7: Verification & Validation
In order to verify the LES solution to the turbulent pipe flow problem, we will compare it against the solution obtained using standard k-e model.
Turbulent Pipe with k-e model
In the Workbench Project Page, left-click on the downward pointing arrow on the top-left corner of the TurbulentPipeLES project and select Duplicate from the drop down menu as shown in the figure below.
...
The solution converges in about 600 iterations.
Create Line
Click on Plots > XY Plot > Set Up... as shown below.
...
Click Here for Higher Resolution
Go to Problem SpecificationExercises