...

T-Beam: Pre-Analysis and Start-Up

Pre-Analysis

It is recommended that you make some back-of-the-envelope estimates of expected results before launching into your computer solution. Here
!roarke_formula1.png|width=200!\
for which the following formula for the axial stress concentration factor, K, holds (Roark's Formulas for Stress and Strain, Warren C. Young and Richard G. Budynas, 2002):
!roarke_formula2.png|width=380!\
We'll compare the above axial stress concentration factor to the value obtained from ANSYS.

...

Continue to Step 2 - Geometry

Go to all ANSYS Learning Modules