Page History

{alias:flatplate}
{panel}
Author: Rajesh Bhaskaran, Cornell University
{color:#ff0000}{*}Problem Specification{*}{color}
[1. Pre-Analysis & Start-up|FLUENT - Flat Plate Boundary Layer Step 1]
[2. Geometry|FLUENT - Flat Plate Boundary Layer Step 2]
[3. Mesh|FLUENT - Flat Plate Boundary Layer Step 3]
[4. Setup (Physics)|FLUENT - Flat Plate Boundary Layer Step 4 *New]
[5. Solution|FLUENT - Flat Plate Boundary Layer Step 5 *New]
[6. Results|FLUENT - Flat Plate Boundary Layer Step 6 *New]
[7. Verification and Validation|FLUENT - Flat Plate Boundary Layer Step 7]
{panel}

h2. Problem Specification

Go to [Step 1: Pre-Analysis and Start-up|SIMULATION:FLUENT - Flat Plate Boundary Layer Step 1]\\
\\  !boundary layer.png!\\ 
Consider air flowing across a flat plate boundary layer with a length of 1m and a vertical air flow length of 0.5m (this is valued used in this simulation, another suitable value can be chosen by the user). The fluid is flowing in the x-direction with a velocity of 1 m/s and the air flow exhausts into the ambient atmosphere which is at 1 atm. Take density to be 1 kg/m^3 and viscosity to be 10 x 10 \^(-3). Solve the problem using Fluent. The Reynold's number based on the plate length is 10,000. Plot the center line velocity and velocity profile at the outlet. Validate your results.\\
\\
\\
[Go to Step 1: Pre-Analysis and Start-up|SIMULATION:FLUENT - Flat Plate Boundary Layer Step 1]\\

[See and rate the complete Learning Module|FLUENT - Laminar Pipe Flow]

[Go to all FLUENT Learning Modules|FLUENT Learning Modules]