...
Flow Rate (L/min) | Max Error % | Pi_LfomOrifice(the number of rows) | LFOM Design | Notes |
|---|---|---|---|---|
100 | 0.398 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
100 | 0.398545 | 10 | This has a higher error but is easier to construct | |
200 | 0.14 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
200 | 0.398718 | 10 | This has a higher error but is easier to construct | |
300 | 0.195 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
300 | 0.398684 | 10 | This has a higher error but is easier to construct | |
400 | 0.109 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
400 | 0.293 | 10 | This has a higher error but is easier to construct | |
500 | 0.097 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
500 | 0.315 | 10 | This has a higher error but is easier to construct | |
700 | 0.046 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
700 | 0.325 | 10 | This has a higher error but is easier to construct | |
1000 | 0.049 | 20 | This design has the lowest error but the construction is difficult because there are excessive orifices to drill | |
1000 | 0.125 | 10 | This has a higher error but is easier to construct |
...