Sign-up for free online course on ANSYS simulations!Authors: Lara Backer and Rajesh Bhaskaran, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Physics Setup
5. Numerical Solution
6. Numerical Results
7. Verification & Validation
Exercises
Comments
Physics Setup
The physics set up is shown in the video below. Velocity could alternately be adjusted to attain Re=20. Cylinder wall sections 0 and 20 are adjusted to 0.4m/s velocity inlet, and 18 and 3 are adjusted to -0.4m/s, as velocity outlets.
Go to Step 5: Numerical Solution
Go to all FLUENT Learning Modules