Skip to end of metadata
Go to start of metadata

Step 6: Specify boundary conditions

Set Options

Select in Main Menu:

Solution > Analysis Type > New Analysis > Modal

Then select in Main Menu:

Solution > Analysis Type > Analysis Options

Enter 10 for No of modes to extract.

Click OK and then OK again to accept defaults for the Block Lanczos Method.

Apply Displacement Constraints

Select in Preprocessor:

Loads > Define Loads > Apply > Structural > Displacement > On Keypoints

Select keypoint at A. Select UX and UY, Enter 0 for Displacement value.

Click OK.

Select keypoint at C. Select UY, Enter 0 for Displacement value.

Click OK.

Specify Damping Ratio

Select in Preprocessor:

Loads > Load Step Opts > Time/Frequency > Damping

Enter 0.02 for Constant damping ratio.

Click OK.

Save your work

Click on SAVE_DB in the ANSYS Toolbar to save the database.

Go to Step 7: Solve!

Go to all ANSYS Learning Modules

  • No labels