Linear Orifice Flow Meter Variable Description Table: in order of appearance in code

Variable Name

Variable Description

Unable to find DVI conversion log file.

Number of riser pipes

Unable to find DVI conversion log file.

minor loss coefficient for rapid mix

Unable to find DVI conversion log file.

Combined area of all orifices

Unable to find DVI conversion log file.

function for determining the orifice areas as the vertical distance on the riser pipe increases

Unable to find DVI conversion log file.

headloss through the Lfom, and the minimum height of the water in the entrance tank

Unable to find DVI conversion log file.

minor loss coefficient for an orifice (was K orifice)

Unable to find DVI conversion log file.

plant flow rate

Unable to find DVI conversion log file.

the inner diameter of the riser pipe

Unable to find DVI conversion log file.

ratio of LFOM pipe area to orifice area

Unable to find DVI conversion log file.

nominal diameter of the riser pipe and rapid mix pipe

Unable to find DVI conversion log file.

enumerated type of pipe

Unable to find DVI conversion log file.

rapid mix head loss

Unable to find DVI conversion log file.

The total pipe length betweeen the bottom of the orifices and the flocculator

Unable to find DVI conversion log file.

viscosity of water through the plant

Unable to find DVI conversion log file.

PVC pipe roughness

Unable to find DVI conversion log file.

Function based off of ramp functions, this is an incremental function that all ows other funtions to evaluate one level of orifices at a time

Unable to find DVI conversion log file.

vertical distance between orifices

Unable to find DVI conversion log file.

elevation between orifice rows at which the flow is calibrated, a 0 or 1 value. 0 corresponds to the current row and 1 corresponds to the next row

Unable to find DVI conversion log file.

funtion to determine target riser pipe flow, incrementally calculates flows

Unable to find DVI conversion log file.

funtion to determine actual flow through orifices

Unable to find DVI conversion log file.

number of orifices

Unable to find DVI conversion log file.

diameter of Lfom orifices

Unable to find DVI conversion log file.

function that determines the diamter of a circle given the area

Unable to find DVI conversion log file.

function that determines the drill bit size necessary

Unable to find DVI conversion log file.

arbitrary value determines the number of orifices in the first row, currently 5 is selected

Unable to find DVI conversion log file.

percent error in the actual flow rate compared to theoretical values

Unable to find DVI conversion log file.

maximum error of Q_LfomError array

Unable to find DVI conversion log file.

headloss from the entrance tank to the flocculator

Unable to find DVI conversion log file.

water depth of entrance tank relative to the bottom of the sedimation tank

Unable to find DVI conversion log file.

height of the start of the floculation tank relative to the bottom of the sedimention tank

Unable to find DVI conversion log file.

difference between height of water in floculation tank and the bottom set of orifices on the LFOM

Unable to find DVI conversion log file.

maximum water level in entrance tank

Unable to find DVI conversion log file.

minimum water level in entrance tank

Unable to find DVI conversion log file.

height of entrance tank walls

Unable to find DVI conversion log file.

height of entrance tank above the top of the riser pipe

Unable to find DVI conversion log file.

safety factor of height of riser pipe above top row of orifices

Unable to find DVI conversion log file.

height of the riser pipe

  • No labels