FLUENT 12.1 - Unsteady Flow Past a Cylinder - Solution

5. Solution

Convergence Criterion: Turn off Drag, Turn on Lift

Solution > Monitors > Drag > Edit.... Then uncheck Print to Console and uncheck Plot. Click ok

Solution > Monitors > Lift > Edit.... Then check Print to Console and Plot. Click ok

Solution Initialization

Adapt > Region.... Then set X Min to 0.5 m, set X Max to 32 m, set Y Min to 0 m, and set Y Max to 32m. Click Mark then click Close.

Solution > Solution Initialization. Set Compute From to farfield1.. Click Initialize. Next, click Patch. Complete patching menu as shown below.

Go to Step 6: Results

See and rate the complete Learning Module

Go to all FLUENT Learning Modules