Unable to render {include} The included page could not be found.
Author: Ben Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Problem Specification
In this exercise, we will examine the stresses and deformation of a wind turbine blade.
The blade is composed of an outer surface and an inner spar. The spar is 0.02 meters thick, and the outer surface is of varying thickness.
Go to Step 1 - Pre-Analysis & Start-Up
Go to all ANSYS Learning Modules