Single Baffle
Simulation Models were created to compare the flow for two geometries:
- Single baffle with sharp corners
- Single baffle with round corners
The gallery below shows results for Static Pressure contours and Velocity Vectors for these geometries. As expected the pressure drop is larger for the case of straight corners.
Two Baffles
Simulation Models were created to compare the flow for two geometries:
- Two baffles with sharp corners
- Two baffles with round corners
The gallery below shows results for Static Pressure contours and Velocity Vectors for these geometries. As expected the pressure drop is larger for the case of straight corners.
These results are preliminary and will be validated taking the following steps:
- Set a standard outlet pressure
- Perform a mesh sensitivity analysis
- Compare Simulation results to experimental data
There are no images attached to this page.