2. Geometry
Double-click on the geometry button,
Proper Orientation
Click once on the XYPlane button,
Now, you should be looking directly at the XY plane and the axises in the bottom right corner should be oriented as they are in the image below.
Line Sketching
First, click on the sketching tab,
Next, click the line button, , and draw two vertical lines that connect the bottom left and the bottom right corners of the rectangle to the x axis. Remember that a "P" should appear when the mouse is directly over a rectangle corner and a "V" should appear when the line your drawing is vertical. Lastly, make sure that a "C" appears before you click on the x axis to terminate the line segments. You should now have an image comparable to the one below.
Dimensioning
Now, the dimensions of the plane frame structure will be inputted into ANSYS. The plane frame structure has symmetry in its geometry, so "equal length" constraints will be used in order to shorten the dimensioning process. First, click on the "Constraints" tab,
Now, the lengths need to be inputted. Input the length of the sides in "Details View" table. Input 3m for the length of the two vertical dimensions, and input 4m for the length of the horizontal line as shown below.
Line Body
At this point a line body will be assigned to each segment of the sketch. Click on "Concept" then click on "Lines From Sketches" as shown below.
Now click on "Sketch 1", , and then click the "apply" which should be within the "Details of Line 1" table. Now, click on the "Generate" button, , and the line body will be created.