Author: Ben Mullen, Cornell University
Problem Specification
[1. Pre-Analysis & Start-Up]
[2. Geometry]
[3. Mesh]
[4. Setup (Physics)]
[5. Solution]
[6. Results]
[7. Verification & Validation]
Problem Specification
A steel bar (E = 2.0E10 Pa, v = 0.3) with the dimensions shown below placed between two walls. On one side, the bar is rigidly fixed to the wall and on the other, there is a 2 mm gap between the wall and the bar. What is the stress in the bar after the temperature increases 100
Unknown macro: {latex}
$ ^
Unknown macro: {circ}
$
C