ANSYS - Plate with a hole - Problem Specification

Problem Specification

Consider the square plate of uniform thickness with a circular hole with dimensions shown in the figure below. The thickness of the plate is 1 mm. The Young's modulus E =10⁷ MPa and the Poisson ratio is 0.3. A uniform pressure p=1 MPa acts on the boundary of the hole. Assume that plane stress conditions prevail. The stress and displacement fields are to be determined using ANSYS. This problem is taken from section 6.14, p. 240-244 of Cook et al


 
Go to Step 1: Start-up and preliminary set-up