AutoCAD Sedimentation Tank Program Inputs
Variable Name |
Description |
---|---|
NDSedPipeEntrance |
Nominal diameter of entrance pipe to sedimentation tank |
ENPipeSpec |
Enumerated type |
NDSedSludge |
Sludge pipe diameter in sedimentation tank |
LSed |
Length of sedimentation tank |
HSed |
Height of sedimentation tank wall |
WSed |
Width of sedimentation tank |
TPlantWall |
Thickness of tank wall of sedimentation tank |
HWSed |
Water depth of the sedimentation tank |
TMp |
Thickness of Main Platform |
HSedAbove |
The height of water above the top of the plate settlers |
LSedInletOrifice |
|
HSedInletOrifice |
|
TSedInletSlope |
|
NSedInletSlope |
|
ANSedBottom |
Sedimentation tank bottom slope |
ANSedSludgeBottom |
|
NDSedLaunder |
Nominal diameter of launder |
HChannel |
Inside height of channel from flocculation tank to sedimentation tanks |
WChannel |
Width of channel between flocculation and sedimentation tank |
TChannelWall |
Thickness of channel wall |
WEChannel |
|
HEChannel |
|
TEChannelWall |
|
HSedBelow |
The height of bottom of sedimentation tank to the bottom of the plate settlers |
DSedLaunderOrifice |
Diameter of launder orifices |
NSedLaunderOrifice |
Number of orifices in the sedimentation tank launder |
BSedLaunderOrifice |
Spacing between orifices throughout the launder |
NSedTanks |
Number of sedimentation tanks |
DSedSludgeOrifice |
Diameter of orifices in sludge pipe |
NSedSludgeOrifice |
Number of sludge orifices |
BSedSludgeOrifice |
Orifice spacing in sedimentation tank draining |
ANSedPlate |
Degree plate settlers are installed relative to the horizontal |
AmpSedPlate |
Amplitude of curves in sedimentation tank lamina |
TSedPlate |
Thickness of plate settlers |
PerSedPlate |
Period of the curves for the plate settlers |
NSedPlateCol |
Number of columns of plate settlers - always equals 1 |
LSedPlate |
Length of plate settlers in the sedimentation tank |
NSedPlates |
Number of plate settlers in sedimentation tank |
BSedPlate |
Plate settler spacing in the sedimentation tank |
laminay |
|
LChannelInlet |
|
WChannelInlet |
|
tankorigin |
|
SSedInlet |
Distance between the bottom of the sedimentation tank and the inlet pipes |