Author: Benjamin Mullen, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Results
Velocity Vectors
First, let's take a look at the velocity vectors. In the Outline window, under Results select Colors and Animations. In the Colors and Animations window, under Graphics, select Vectors. Then press Set Up....
In the Vectors window that opens, change the Scale of the arrows to 0.25
, and change the Color by parameter to Velocity... Mach Number
Hit Display to view the vectors in the graphics window
Once you have plotted the velocity vectors, you may close the Vectors menu.
Mach Number Contours
Next, we will plot the contours of mach number. In the Graphics and Animations window under _Graphics, select Contours, and press Set Up.... Change the Contours Of parameter to Velocity... Mach Number. Next, check the box next to Filled.
Change the Levels to 50
and press Display
Pressure Coefficient Contours
Now, change the Contours Of parameter to Pressure... Pressure Coefficient and press Display.
When you have plotted the contours, you may close the Contours window.
Pressure Coefficient Along Wedge
In the Outline window under Results, select Plots. In the Plots window, select XY plot and press Set Up.... Change the Y Axis Function to Pressure... Pressure Coefficient, and select the Wedge under Surfaces.