Documentation for ChemIT staff.
Log into Remedy:

http://cornell.onbmc.com/

Roger's Remedy book

Never BCC: to Remedy

It won't know you're sending to ChemIT, and will send the request to the CU Help desk. Just don't.

Enter new calls

1. In Remedy – Most complete, a bit slower, allows you to enter needed info in correct places, as well as sending the client a message with ticket number. This is good – we want clients to know their issue is being tracked.
2. From the ChemIT Request form – Provides faster initial entry – allows you to included needed info, as well as entering the client in the NetID field which will send them the call info. Details will be in the work info, and will still need to be edited in Remedy fields.
3. From your email or ChemIT – Please don't do this. It makes a call in the wrong name, wrong notification, and still needs to be edited anyhow, so it doesn't save time, and doesn't get the client in the loop.

Accepting / editing Calls

Be sure to look for and help edit / classify / assign calls throughout the day

1. Show "Assigned to all my groups" and "All open and updated by Email > All Priorities" periodically. To accept or assign a call:
   1. In assigned group, begin typing chem – the select the assigned group of Chemistry (standard desktop response) or
   2. Set the assigned group to Chemistry (L2) for calls which require engineering / development / advanced troubleshooting. This may also be changed after initial assignment when needed.
   3. Select the assignee from the drop down list.
2. Check the "Unassigned", and see what you can help with, or if something needs quick attention from someone.
3. Open un-edited calls and
   1. Set the Service type
   2. Set the product classification (works best if it will recognize a product name)
   3. Select the Reported Source (email is default).
   4. Assign to a group member if appropriate
   5. SAVE changes

Responding to / working on calls

1. Email to client from within remedy using Function / Email System – works. Need to manually add additional cc: for each message.
2. Email to client from ChemIT or your NetID in Outlook – Works well – Reply to all, INCLUDING ChemIT & Incident #. ChemIT must be a visible recipient, and not a BCC.
   1. Note: Remedy will mis-classify this as "Customer  Communication", rather than  system email.
3. Make additional notes about work done, details discovered, etc in Work Detail tab – you can make many entries, which can help track progress, and help anyone else who works on this issue.

Resolving calls

1. Be sure service & prod cat is set
2. Enter your time spent (Assignee Effort) and others time spent (Assignment log) and SAVE
3. Click Resolve
   1. Enter final work done, result, etc in Resolution (This will go to the client)
   2. Set the status reason (Usually No Further Action, may be others)
   3. Add any additional work info in Notes
   4. SAVE

Review & Additional follow up

1. Check your calls – "Assigned to me", and "All open and updated by email" daily.
   1. Close out things you are done with as soon as possible – this will improve our reporting metric for how long things are open.
   2. Re-assign or ask for help on things that are "stuck"
   3. Set status for calls that are waiting for client response to "Pending" (stops the service response ticker?), and back to in progress when it is.

Look for calls marked "Email update" – May include open or resolved calls. This indicates that new email has been received which may need action. Read, and clear the "Updated by Email" checkbox. Save. Re-open resolved tickets if necessary.

Tips, tricks, and gotchas

Clear your cache

Per CU's Remedy Support Team, 9/27/13: If you have issue with Remedy this morning, there is a good chance that the problem can be resolved by clearing your browser cache. Instructions for how to do this in the major browsers can be found at:

http://www.wikihow.com/Clear-Your-Browser's-Cache

There is no need to clear your browsing history, cookies, or other elements. If after clearing the browser cache, you still cannot log in, please email remedy-admin@cornell.edu for assistance.

Gotchas if ticket passed from CIT back to ChemIT

Happens when calls passed back-and-forth with CIT. For instance, with the ATC. Oliver sent one of our tickets to ATC (CIT), INC000000895224. When they did their work, Oliver went to email the client from within the ticket, in Remedy, and he noticed:

The From: address in Remedy's email app. can change automatically

It //defaulted// to a From: address of the ATC, not ChemIT. Oliver fortunately noticed this and changed the From: address back to ChemIT before sending the email. Don't forget to watch for this. :-)

The Assigned Group (and Assignee) were changed

These fields were set to Course Technologies (John S Udall). Oliver noticed ticket not showing up in his queue. But he's leaving it as-is for this ticket because next action still with John Udall.

Notes from John Udall, at CIT (as FYI)

9/5/13

When you change ownership of a ticket to another "Assigned Group"  in Remedy, it can (and often does) change the from/reply-to address.

There are a couple of options for working with this functionality --
1.) If you assign a ticket to one of the teams in Academic Technologies (for example Course Technologies), then you can request that they re-assign the ticket back to ChemIT (Is that -- Assigned Group =  Cornell University - IT > A&S > Chemistry ?), once the ticket is complete.  Then you can close the loop with the customer.

2.) Where things get tricky is if both groups (Academic Technologies, and ChemIT) are communicating with the customer from within the ticket via Remedy Email while the ticket is being worked.   (This is the scenario we are seeing with INC000000895224.)  When this occurs, we each have to be careful to look at the from/reply-to address when emailing from within Remedy. The from/reply-to address will depend on which group owns the ticket at the time.   Functionally, it doesn't matter, because it all goes to Remedy, and is keyed off the Incident number.  But the goal, I think, is to avoid confusing the customer.

I don't think that this is inconsistent with what you were saying in your email & Remedy tips in Confluence.  It just calls out that, a.) if you want Academic Technologies to re-assign tickets back to ChemIT in Remedy when we are done with them, so that you can follow-up, we can do that.  But you will have to ask us to do that each time / for each ticket.   And b.) if we are going back-and-forth with a customer, then we both need to be careful about where the emails are saying that they are coming from.

One thing that I haven't tested is who can reply to a ticket via email, and expect to have response forwarded to the customer automatically by Remedy.  I think that also depends on which person is assigned to the ticket at the time.  This might be worth testing at some point.

It's worth mentioning that Academic Technologies has only been using Remedy since January, 2013.  We are still shaking out our business processes around its use.  Some units of CIT have been using Remedy much longer, and may have other business processes in place.  So, I'm not sure you can generalize beyond tips about the behavior of the Remedy application itself (which in some cases, may have different configurations, and therefore different behaviors, from group to group).