Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.
Numerical Results
This page goes through the post-processing steps for the Supersonic Flow Over a Wedge in the CFD Post post-processor included with ANSYS Workbench. For instructions on performing the post-processing using the classic FLUENT post-processor, see this page.
Mach Number Contours
The following video shows how to make a plot of the Mach number contours using CFD Post, the CFD post-processor included with ANSYS Workbench.
Pressure Contours
The following video shows how to make a plot of the pressure contours.
Velocity Vectors
To plot the velocity vectors, follow the steps in the video below.
Plot Mach Number Variation Along y=0.4 m
First, we'll create a line at y=0.4m. Then, we'll plot the Mach number variation along this line using the "Chart" facility in CFD Post. These steps are shown in the video below.