Problem Specification |
Label the boundaries according to the figure shown below.
https://confluence.cornell.edu/download/attachments/103729621/step3_img001.jpg?version=1 |
We will label edge A as farfield1, edges B and C as farfield2, edges D and E as farfield3, edges E,G and H as farfield4 and the edges I and J as cylinder.
Edges |
Name |
A |
farfield 1 |
B,C |
farfield 2 |
D,E |
farfield 3 |
F,G,H |
farfield 4 |
I,J |
cylinder |
Operation Toolpad > Zones Command Button > Specify Boundary Types
Specify boundary according to the table above. Next to Name, enter the name accordingly. Leave the Type as WALL. We will specify boundary type using FLUENT.
Main Menu > File > Save
Main Menu > File > Export > Mesh...
Save the file as cylinder.msh.
Make sure that the Export 2d Mesh option is selected.
Check to make sure that the file is created.
Go to Step 4: Set Up Problem in FLUENT
See and rate the complete Learning Module
Go to all FLUENT Learning Modules