Problem Specification |
Label the boundaries according to the figure shown below.
(Click picture for larger image)
We will label edge A as farfield1, edges B and C as farfield2, edges D and E as farfield3, edges E,G and H as farfield4 and the edges I and J as cylinder.
Edges |
Name |
A |
farfield 1 |
B,C |
farfield 2 |
D,E |
farfield 3 |
E,G,H |
farfield 4 |
I,J |
cylinder |
Operation Toolpad > Zones Command Button > Specify Boundary Types !btype_cb.jpg|width=32,height=32!Specify boundary according to the table above. Next to Name, enter the name accordingly. Leave the Type as WALL. We will specify boundary type using FLUENT.
Main Menu > File > Save
Main Menu > File > Export > Mesh...
Save the file as cylinder{{.msh}}.
Make sure that the Export 2d Mesh option is selected.
Check to make sure that the file is created.
Go to Step 4: Set Up Problem in FLUENT
See and rate the complete Learning Module
Go to all FLUENT Learning Modules