This document describes the procedure used to install Shibboleth Service Provider (SP) software on Centos, RedHat and to configure it to work with the Cornell Shibboleth Identity Provider (IdP).
Shibboleth doesn't support http access. If http access is supported on your site, define a redirect rule in Apache configuration that route http traffic to https.
Copy generated content to /etc/yum.repos.d/shibboleth.repo
sudo yum install shibboleth.x86_64 ( 64 bit OS ) sudo yum installshibboleth (32 bit OS )
Make sure you are running Ubuntu version 20.04 or above. Otherwise you may have SP 2 instead of SP 3 installed. SP 2 is no longer supported.
sudo apt-get update
sudo apt-get install libapache2-mod-shib2
sudo a2enmod shib
Configuration - Shibboleth SP
After installation Shibboleth configuration files are placed at /etc/shibboleth/. Necessary Apache configuration in /etc/httpd/conf.d/shib.conf(Centos/Redhat), /etc/apache2/conf-available/shib.conf (Ubuntu). Make sure shib.conf is included in your Apache configuration file. If you are converting CUWebAuth to Shibboleth on a production server, make sure you set "ShibCompatValidUser" to "On" in shib.conf to avoid interruption to your website's CUWebAuth authentication. Set it back to "Off" after you finish the conversion.
Download our sample attribute-map.xmland replace your /etc/shibboleth/attribute-map.xml with downloaded file. Our attribute-map.xml defines all commonly used attributes.
All attributes except groups defined in attribute-map.xml are released by default to all SP. Attribute "groups" is released on demand. Please specify your group names in Shibboleth Integration Request form. Shibboleth IDP doesn't support nested groups( for example group B is a member of group A, user C is a member of group B, IDP doesn't know user C is a member of group A) . If you have to use nested group, you need to convert nested group to dynamic group.
Download our sample shibboleth2.xml and replace your /etc/shibboleth/shibboleth2.xml with downloaded file. Open shibboleth2.xml in a text editor.
Update SP entityID:
Search <ApplicationDefaults entityID="https://mysite.cit.cornell.edu/shibboleth"... >. EntityID is the Unique identifier for your SP. Cornell Shibboleth Identity Provider(IDP) provides service to many applications. This entityID will help Cornell IDP to identify your SP. We recommend you follow shibboleth convention named it "https://xxx/shibboleth". It's better not include space or special characters in it( / and : are fine). One SP can server multiple sites in your Apache so it doesnotnecessarily equate to the hostname(s) at which your service runs.
--- lifetime is the maximum duration in seconds that a session maintained by the SP will be valid.The settings shown in the example will set your Shibboleth session lifetime to 28800 (8 hours).
--- timeout is the maximum inactivity allowed between requests in a session maintained by the SP. The settings shown in the example will set your Shibboleth session timeout to 3600 (1 hour).
Add it to <Sessions ..> if your website has web form. Web form POST data will be saved in the Shibboleth memory cache rather than discarded when a user requires authentication after filling out a web form. "postTemplate.html" is located in /etc/shibboleth directory. Modify it to meet your website's style.
Search<ErrorssupportContact="root@localhost" helpLocation="/about.html"styleSheet="/shibboleth-sp/main.css" />. Change the email address to your application's support email address. Change the helpLocation to your application's help page.
If Shibboleth is installed via RPM, signing/encryption key and certificate files are generated automatically. Check if you have sp-signing-cert.pem, sp-signing-key.pem, sp-encrypt-key.pem, sp-encrypt-cert.pem in /etc/shibboleth directory. If they are not there, generate them.
shib-keygen -n sp-signing -h yourServername -y 10 (your servername will be the CN of the certificate)
shib-keygen -n sp-encrypt -h yourServername -y 10
After you run the commands, four files are created: sp-encrypt-cert.pem, sp-encrypt-key.pem,sp-signing-cert.pem, sp-signing-key.pem. These files should be owned by shibd.
NOTE: Signing and encryption certificates are included in your SP's metadata. You should preserve these four files and put them back when you do a fresh SP rebuild using Docker or other container software.
Shibboleth Configuration Check
In the command line, execute the following command to see whether the Shibboleth Service Provider can load the default configuration:
overall configuration is loadable, check consolefornon-fatal problems
If there are any ERROR log entries, we strongly recommend you resolve these. Messages with log level WARN are generally not problematic but you should understand the causes of these warning messages and run the configuration check again when you are finished with your setup.
Logs for Shibboleth SP are located at /var/log/shibboleth/. Take a look at /var/log/shibboleth/shibd_warn.log and make sure there is no error in there. You need to fix error if there is any and restart shibd and httpd.
Start Shibboleth Service Provider and Apache
shibd is installed to /usr/sbin and may be managed using service and chkconfig (on System V platforms) or with systemctl (on systemd platforms, some additional information available).
On Centos 7, you can start shibd and apache by running
sudo systemctl start shibd
sudo systemctl start httpd
After you run the command, make sure shibd and httpd are running.
Register Service Provider with Cornell IDP
Navigate to https://yoursiteDomain/Shibboleth.sso/Metadata and download it.Open your downloaded file with text editor. Some browser doesn't show metadata correctly in the browser. DO NOT copy the content in the browser. Make sure the entityID is the same as your defined in shibboleth2.xml. If there are multiple sites in Apache require Shibboleth authentication, you can get SP's metadata by navigating to one of the site, then you need to manually add assertion consumer service url for each of the other sites in your SP's metadata.
Example
In our example, SP's metadata can be obtained from https://shibtest.cit.cornell.edu/Shibboleth.sso/Metadata. In the metadata there should be a line:
<md:AssertionConsumerService Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Location="https://shibtest.cit.cornell.edu/Shibboleth.sso/SAML2/POST" index="1"/>
There is another site mytest.cit.cornell.edu hosted in the same Apache. Another AssertionConsumerService url for mytest.cit.cornell.edu need to be manually added in the metadata:
<md:AssertionConsumerService Binding="urn:oasis:names:tc:SAML:2.0:bindings:HTTP-POST" Location="https://mytest.cit.cornell.edu/Shibboleth.sso/SAML2/POST" index="2"/>
Submit your shibboleth integration request from https://shibrequest.cit.cornell.edu. On the second page of the request form, select 'No' for question "Has the application service provider's metadata been published with InCommon?". Use text editor open your SP's metadata, copy the content of the metadata and paste it in the "Service Provider's metadata field. Once the form is submitted, Identity Management team get a Remedy case. We'll configure your SP in IDP in 1 - 2 business day. We'll notify you when the configuration is complete.
Configuration - Apache Access control
After you are notified that your metadata has been integrated in Cornell IDP, you can continue your configuration.
Open /etc/httpd/conf.d/shib.conf in a text editor. If you are Not using default Apache installation, make sure this file is included in your Apache config. All the authorization rules should be defined in this file.
<Location /studentOnly>
AuthType shibboleth
ShibRequestSetting requireSession 1
Require shib-attr eduPersonPrimaryAffiliation student
</Location>
<Location /secure>
AuthType shibboleth
ShibRequestSetting requireSession 1
Require shib-attr eduPersonAffiliations staff
</Location>
*eduPersonPrimaryAffiliation is single value attribute while eduPersonAffiliations is multi-values attribute.
For example, a staff who also taking courses at Cornell has staff as the value of eduPersonPrimaryAffiliation, has staff and student as the value of eduPersonAffiliations.
All the possible value of affiliations can be found at https://confluence.cornell.edu/display/IDM/edupersonprimaryaffiliation+and+edupersonaffiliation+details
After you finish the configuration, restart Apache.
Test SP integration with IdP
Confirm you are able to log in with your netID and user's attributes are properly released. To verify attribute release, in shibboleth2.xml, you need to set showAttributeValues to true and restart shibd, httpd.
Using a web browser, visit the /secure directory (or other protected location) of your SP.
If you are prompted to log in, that means that your SP is properly integrated with Cornell IdP.
After you log in, open a new tab of the same browser and point your web browser to https://<your dns name>/Shibboleth.sso/Session. Your browser should return a status page that show you all the attributes and values released to your SP.
Auto start shibd after server reboot
sudo systemctl enable shibd
Retrieve Shibboleth Attributes in Application
By default, Shibboleth attributes that released to your shibboleth SP are available to your application as environment variables, not available in HTTP headers. In your application, you should get authenticated user's netID from server variable REMOTE_USER.
If you have tomcat in your environment, since environment variables are not passed by mod_proxy_ajp unless they have AJP_ prefixes, you'll need to add attributePrefix="AJP_" to the <ApplicationDefaults> element in your configuration:
