Sign-up for free online course on ANSYS simulations!
Authors: Rajesh Bhaskaran & Michael Mahoney, Cornell University
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Physics Setup
5. Numerical Solution
6. Numerical Results
7. Verification & Validation
Exercises
Comments
Physics Setup
Under Construction
Gas Pressure
The pressure values at the top and bottom of our model are indicated in the image below.
The regeneration channels are omitted in the model. In exchange, a free body diagram is used to deduce the equivalent forces on the mid nozzle and lower nozzle (the upper nozzle is not modeled here). This force pair is modeled as two separate forces.