You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 25 Next »

Unknown macro: {alias}

Author: Rajesh Bhaskaran, Cornell University

Problem Specification
[1. Start-up and preliminary set-up]
[2. Specify element type and constants]
[3. Specify material properties]
[4. Specify geometry]
[5. Mesh geometry]
[6. Specify boundary conditions]
[7. Solve!]
[8. Postprocess the results]
[9. Validate the results]

Problem Specification

Geometry

[click here for full view|^crankDiagram.jpg]

Material Properties

E=2.8E7 psi
v=0.3

Loads and Constraints

[Go to Step 1: Start-up and preliminary set-up]

[See and rate the complete Learning Module]

Go to all ANSYS Learning Modules

  • No labels