AutoCAD Sedimentation Tank Program Inputs

ND_{SedPipeEntrance} - nominal diameter of entrance pipe to sedimentation tank
EN_PipeSpec - enumerated type
ND_SedSludge - Sludge pipe diameter in sedimentation tank
L_Sed - length of sedimentation tank
H_Sed - height of sedimentation tank wall
W_Sed - width of sedimentation tank
T_PlantWall - Thickness of tank wall of sedimentation tank
HW_Sed - water depth of the sedimentation tank
T_Mp - Thickness of Main Platform
H_SedAbove - The height of water above the top of the plate settlers
L_{SedInletOrifice} -
H_{SedInletOrifice} -
T_{SedInletSlope} -
N_{SedInletSlope} -
AN_SedBottom - Sedimentation tank bottom slope
AN_{SedSludgeBottom} -
ND_SedLaunder - nominal diameter of launder
H_Channel - inside height of channel from flocculation tank to sedimentation tanks
W_Channel - width of channel between flocculation and sedimentation tank
T_ChannelWall - thickness of channel wall
W_EChannel -
H_EChannel -
T_EChannelWall -
H_SedBelow - the height of bottom of sedimentation tank to the bottom of the plate settlers
D_{SedLaunderOrifice} - diameter of launder orifices
N_{SedLaunderOrifice} -
B_{SedLaunderOrifice} -
N_SedTanks - number of sedimentation tanks
D_{SedSludgeOrifice} - Diameter of orifices in sludge pipe
N_{SedSludgeOrifice} - number of sludge orifices
B_{SedSludgeOrifice} - Orifice spacing in sedimentation tank draining
AN_SedPlate - Degree plate settlers are installed relative to the horizontal
Amp_SedPlate - Amplitude of curves in sedimentation tank lamina
T_SedPlate - Thickness of plate settlers
Per_SedPlate - Period of the curves for the plate settlers
N_SedPlateCol - number of columns of plate settlers - always equals 1
L_SedPlate - length of plate settlers in the sedimentation tank
N_SedPlates - number of plate settlers in sedimentation tank
B_SedPlate - plate settler spacing in the sedimentation tank
lamina_y -
L_ChannelInlet -
W_ChannelInlet -

tank_origin -
S_SedInlet - distance between the bottom of the sedimentation tank and the inlet pipes