You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 39 Next »

Numerical Results

See below for tips on how to zoom in, zoom out etc.

Velocity Vectors

Results > Graphics and Animations > Vectors > Set Up...
Then click Display. The Scale was set to 2 in the plot below.

Higher Resolution ImageVisit page in new window

Stream Lines

Results > Graphics and Animations > Contours > Set Up...
Set Contours of to Velocity.. and set the box below to Stream Function. Make sure Filled is not selected and click Display. The plots below were created by setting levels to 40, deselecting Auto Range, setting Min (kg/s) to 31 and setting Max (kg/s) to 33.

Higher Resolution ImageVisit page in new window

Vorticity

Results > Graphics and Animations > Contours > Set Up...
Set Contours of to Velocity.. and set the box below to Vorticity Magnitude. Then click Display. The plot below was created by by setting levels to 60, deselecting Auto Range, setting Min (1/s) to 0.25 and setting Max (1/s) to 9.

Higher Resolution ImageVisit page in new window

Drag Coefficient

Reports > Result Reports > Forces > Setup
Then, click Print. The command pane will now display the following results: the pressure force, the viscous force, the total force, the pressure force coefficient, the viscous force coefficient and the drag force coefficient. As one can see from the following image link, FLUENT yields 2.04 for the value of the drag coefficient.

Drag CoefficientVisit page in new window


Manipulating the Model

Some of the operations available in the graphics window are: 

Translation: The model can be translated in any direction by holding down the Left Mouse Button and then moving the mouse in the desired direction. 

Zoom In: Hold down the Middle Mouse Button and drag a box from the Upper Left Hand Corner to the Lower Right Hand Corner over the area you want to zoom in on. 

Zoom Out: Hold down the Middle Mouse Button and drag a box anywhere from the Lower Right Hand Corner to the Upper Left Hand Corner

 

Go to Step 7: Verification & Validation

Go to all FLUENT Learning Modules

  • No labels