You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 35 Next »

Unable to render {include} The included page could not be found.
Unable to render {include} The included page could not be found.

Numerical Results

Velocity Vectors

Results > Graphics and Animations > Vectors > Set Up...
Then click Display. The Scale was set to 2 in the plot below.


Higher Resolution ImageVisit page in new window

Stream Lines

Results > Graphics and Animations > Contours > Set Up...
Set Contours of to Velocity.. and set the box below to Stream Function. Make sure Filled is not selected and click Display. The plots below were created by setting levels to 40, deselecting Auto Range, setting Min (kg/s) to 31 and setting Max (kg/s) to 33.


Higher Resolution ImageVisit page in new window

Vorticity

Results > Graphics and Animations > Contours > Set Up...
Set Contours of to Velocity.. and set the box below to Vorticity Magnitude. Then click Display. The plot below was created by by setting levels to 60, deselecting Auto Range, setting Min (1/s) to 0.25 and setting Max (1/s) to 9.


Higher Resolution ImageVisit page in new window

Drag Coefficient

Reports > Result Reports > Forces > Setup
Then, click Print. The command pane will now display the following results: the pressure force, the viscous force, the total force, the pressure force coefficient, the viscous force coefficient and the drag force coefficient. As one can see from the following image link, FLUENT yields 2.04 for the value of the drag coefficient.

Drag CoefficientVisit page in new window



Go to Step 7: Verification & Validation

Go to all FLUENT Learning Modules

  • No labels