Unable to render {include} The included page could not be found.
Problem Specification
1. Pre-analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Problem Specification
A simplified CubeSat is held in a rectangular box called a P-POD while being launched into orbit. The 1U CubeSat with legs has dimensions of 10.5cm x 10cm x 10cm. The structure is made of Aluminum 6061-T6. The CubeSat also contains boxes and a cylinder, which represent simplified internal components such as a main flight computer and the attitude control system.
Go to Step 1 - Pre-Analysis & Start-Up
Go to all ANSYS Learning Modules