Author: John Singleton and Rajesh Bhaskaran, Cornell University
Problem Specification
1. Pre-Analysis & Start-up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification & Validation
Exercises
Step 6. Results
Post Processing
We will use CFD-Post as the primary post processing GUI. Steps for post processing in FLUENT can be found here.
Tip
For convenience, you can import quantities from FLUENT into CFD-Post. From FLUENT, click on File > Data File Quantities:
In Data File Quantities dialogue, select the desired quantities and click on OK.
Note
Students in MAE 6510 will need to select the Nusselt number in addition to the skin friction coefficient for your HW assignment. In ANSYS user manual, reference values are used to define the skin friction coefficient and the Nusselt number. Hence, you will need to specify the appropriate reference density, velocity, length, and temperature in FLUENT before you solve the model.
Double click on Results from the Workbench Window to launch CFD-Post.
Velocity Vectors
Click on the z-axis,
to view the XY plane. Click on the vector icon to insert a vector plot. Name it Velocity Vector.A panel named "Details of Velocity Vector" will appear right below the outline window. Set the Locations to symmetry 1. Click on Apply to display the velocity vectors.
The velocity vectors will be displayed in the view window.
You can use the wheel button of the mouse to zoom into the region that closely surrounds the plate, to get a better view of the boundary layer velocities:
Pressure Contour
Insert > Contour. Name it Pressure contour.
In Details of Pressure contour, change the locations to symmetry 1, change the variable to Pressure, and change the number of contours to 50.
Click on Apply to view the contour.
Outlet Velocity Profile
We will create a line that corresponds to the x=1 line (outlet). Then the velocity along this line can be plotted. From the toolbar, insert > location > line. Name it "Outlet"
In the Details of Outlet panel, enter the following coordinates. Change the number of samples to 50. Click on Apply to create a line at the outlet.
Insert a chart from the menu: insert > chart. Name the chart "Velocity Profile". Change the title to "Velocity Profile" in the General tab. In the Data Series tab, rename Series 1 to FLUENT and select Outlet for location. Select Velocity as the variable in the X Axis tab and select Y as the variable in the Y Axis tab. Click on Apply to generate the chart.
The velocity profile at the outlet is shown below:
We would like to compare the FLUENT result to the Blasius boundary layer solution. Download the Blasius solution here. Return to the Data Series tab and insert another data set. Rename it Blasius. Instead of specifying the location of the data, select the Blasius solution file you have downloaded.
Click on Apply. The comparison should look like the following plot:
Normalized velocity profile
We will observe the normalized velocity (u/U_infinity) at the outlet. Insert a point and call it free stream. The velocity at this point will be extracted and set to the free stream velocity (U_infinity).
Enter the following coordinates and click on Apply.
The location of this point can be visualized in the 3D viewer:
In the expressions tab, create a new expression and name it "Uinf". In Details of Uinf, enter the following command and click on Apply:
Notice Uinf returns 1 m/s as the velocity at the point where we defined as free stream. This is the same free stream velocity that we have set up in FLUENT.
Insert another expression and name it "u normalized". Enter the following command and notice its value is a variable. This is because the u-velocity varies in the y direction.
In the Variables tab, create a new variable and name it "normalized u". Retain Expression for the Method and change the expression to "u normalized" from the drop down list. Click on Apply. normalized u now appears as an variable.
Insert a chart and name it "normalized velocity". Select Outlet for the location in Data Series. Select normalized u for the X variable and Y for the Y variable. Click on Apply to view the chart.
Notice the scale of this profile is exactly the same as that of the outlet velocity profile. This is because the free stream velocity, Uinf, is 1 m/s.
Mid-Section Velocity Profile
Here, we will plot the variation of the x component of the velocity along a vertical line in the middle of the geometry. In order to create the profile, we must first create a vertical line at x=0.5m. Insert another line, same as the previous step, and name it Mid section. Enter the following numbers to create a vertical line at x=0.5m. Set the number of samples to 50. Remember to click on Apply to finish.
Insert another chart and name it Mid Section Velocity Profile. In the General tab, change the title to "Velocity profile". Select Mid Section as the location and rename Series 1 to Mid section. We will compare the velocity profiles at the mid section and at the outlet. Repeat the procedure in the previous step to insert the velocity profile at the outlet. Change the variable to Velocity in the X Axis tab and change the variable to Y in the Y Axis tab. Click on Apply to generate the chart.
The velocity profile comparison is shown below:
Skin Friction Coefficient
We can plot the skin friction coefficient imported from FLUENT as a function of distance along the plate. Insert a line and name it "plate wall". Enter the end points of the line and the number of samples as the following:
Insert a chart and name it Cf along wall. Use the same name for the chart title.
From the Data Series tab, Select "plate wall" for the location.
In the X Axis tab, select X as the Variable. In the Y Axis tab, select Skin Friction Coefficient as the Variable.
The skin friction coefficient along the plate is shown below:
It is of interest to compare the numerical skin friction coefficient profile to the skin friction coefficient profile obtained from the Blasius solution. We will compare the FLUENT result to the Blasius solution. Download the Blasius solution here. The comparison is shown below:
You can export the skin friction coefficient for data manipulation.
Go to Step 7: Verification & Validation