Author: John Singleton and Rajesh Bhaskaran
Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises
Under Construction!!
Problem Specification
In this tutorial we will simulate the unsteady flow of a fluid past a cylinder. For this tutorial we will use a Reynolds Number of 120. In order to simplify the computation, the diameter of the pipe is set to 1 m, the x component of the velocity is set to 1 m/s and the density of the fluid is set to 1 kg/m^3. Thus, the dynamic viscosity must be set to 8.333x10^-3 kg/m*s in order to obtain the desired Reynolds number.
Go to Step 1: Pre-Analysis and Start-Up
See and rate the complete Learning Module
Go to all FLUENT Learning Modules