You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 9
Next »
Unable to render {include} The included page could not be found.
2. Geometry
Double-click on the geometry button,
, in the Project Schematic area, which should launch the Design Modeler in ANSYS. A folder called "A: Static Structural (ANSYS) should be expanded in the tree outline of the Design Modeler. If it is not expanded, then expand it now.
![](/download/attachments/127118943/begintreestruct.png?version=1&modificationDate=1287597966000&api=v2)
Proper Orientation
Click once on the XYPlane button,
. Next, click once on the royal blue Z vector (displayed below) which should be in the bottom right section of the Design Modeler window.
![](/download/attachments/127118943/bluez.png?version=1&modificationDate=1287598005000&api=v2)
Now, you should be looking directly at the XY plane and the axises in the bottom right corner should be oriented as they are in the image below.
![](/download/attachments/127118943/xycomp.png?version=1&modificationDate=1287598015000&api=v2)
Go to Step 3: Mesh
See and rate the complete Learning Module
Go to all ANSYS Learning Modules