Problem Specification
1. Start-up and preliminary set-up
2. Specify element type and constants
3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve
8. Postprocess the results
9. Validate the results
Step 8: Postprocess the Results
...
Nodes 7 and 10 are attached to the upper area of the upper disk. From the list above we can see that the displacement of these nodes is the same and has a value of -0.2525e-01. Recall that the geometry was specified in mm. As a result, the displacement has units of mm. Therefore, the approach or total distance through which the two bodies move towards each other is 0.0252 mm.