Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Panel

Problem Specification
1. Start-up and preliminary set-up
2. Specify element type and constants
3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve!
8. Postprocess the results
9. Validate the results

Step 8: Postprocess the results

...

Main Menu > General Postproc > Plot results > Contour Plot > Nodal Solu

Select Stress from the left list, von Mises SEQV from the right list and click OK.

...

Main Menu > General Postproc > Options for Outp

Select Global Cylindric for Results Coord System.

To display theσθstress distribution over face 1 as continuous contours, select

...

Main Menu > General Postproc > Contour Plot > Plot results > Nodal Solu

Select Stress from the left list, Y-direction SY from the right list and click OK.

(Click Picture for Larger Image)

...

Utility Menu > PlotCtrls > Style > Contours > Uniform Contours

Enter 2 for Number of contours, and choose User specified for Contour Intervals. Enter Min contour value=-0.2E9, Max contour value=0.2E9, and Contour value incr=0.2E9. Click OK.

This plots the regions with positive and negative σθvalues in different colors. In the red region, 0<σθ<200MPa and in the blue region, -200MPa<σθ<0. So the boundary between the two colors is the neutral axis.

...

Main Menu > General Postproc > Plot results > Nodal Solu...

Select Stress from the left list, X-direction SX from the right list and click OK.

Change contour plot options back to original:

Utility Menu > PlotCtrls > Style > Contours > Uniform Contours

Enter 9 for Number of Contours, and choose Auto calculated for Contour Intervals. Click OK.

(Click Picture for Larger Image)

...

Main Menu > General Postproc > Plot Results > Deformed Shape

Select Def + undeformed and click OK.

This plots the deformed and undeformed shapes in the Graphics window. The maximum displacement DMX=0.230e-4 m.

...

Utility Menu > PlotCtrls > Animate > Deformed Shape

Select Def + undeformed and click OK. Select Forward Only in the Animation Controller.

...

Utility Menu > PlotCtrls > Animate > Deformed Shape

Select Def + undeformed and click OK. Select Forward Only in the Animation Controller.

From this animation, check that the BCs for v on both faces are satisfied.

Save your work: Toolbar > SAVE_DB

Go to Step 9: Validate the results

See and rate the complete Learning Module

...