Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Include Page
MATLAB Google Analytics
MATLAB Google Analytics
Include Page
redAnTS 1 - Panel
redAnTS 1 - Panel

Numerical Solution

INTRODUCTORY redAnTS TUTORIAL

...

The only solution option available in redAnTS is static deformation. Advanced FEA packages will offer solution options such as modal, buckling, etc. Select Static under the Solvermenu Solver menu. This assembles and solves the global matrix. Since this is a small problem with less than 100 elements, this takes very little time. Bigger problems will take much longer for the computer to crunch through. Verify that under Current Settings, the software reports Displacements done. Let's take a look at the nodal displacement values to check that they look plausible.

Nodal Displacements

Under Plotting, select Displacement. The nodal displacements are shown below.


 

(Click for enlarged image)

Does the displacement field satisfy the imposed boundary conditions shown in this figure? Are the largest displacements where you expect them to be? Are the normal displacements zero for the sides for which this condition is imposed?

Deformed Mesh

Let's take a peek at how the elements have deformed under the applied uniaxial tension. Under Plotting, select Deformed mesh. Since the deformations are usually very small, the program asks for a maginification factor to make them more visible in the plot. Enter 500 for the magnification factor and click OK. You can move the legend out of the way by dragging it with the mouse.


 

We see that elements have been stretched in the x' direction which is the direction along which the tension has been applied. The elements have also shrunk in the y' direction. This behavior is as expected.

To save a copy of the plot, click on Plot in the Export menu. Save the plot as deformed_mesh.fig. To convert from MATLAB's fig format to a more portable format, say, jpeg, open deformed_mesh.fig in MATLAB as follows: at the MATLAB prompt, type open('deformed_mesh.fig'). This will display the plot in a MATLAB window. You should always include a plot legend to tell the reader what the different lines correspond to. Take a few seconds to get frustrated that MATLAB loses the legend (aarrgggh!!bang!!bang!!). Clever engineers that we are, we'll add the legend back manually. Go to the MATLAB command prompt and type in the appropriate legend command: legend('Mesh','Deformed mesh (500x)'). You can move the legend around by dragging it. In the figure window, select File -> Save as. Under Save as type, select JPEG image and click Save. Open the jpeg image from your working folder to verify that it has been created properly.

To get an idea of the information available in the help page for the Solver menu, click on Help for this menu and scan through it. Click OK.

Since the nodal displacements look plausible, let's prod the beast to display various stress and strain components i.e. post-process the results. This will occupy us in step 56. Note that the student version doesn't come with the post-processing module. You'll have to wait until you have developed this module before you can go through step 56. When you are finished with your post-processing module, return to step 56. This will also help you validate your module.

Go to Step 6: Numerical Results

Go to all MATLAB Learning Modules toStep 5: Post-process the solution