Wiki Markup |
---|
h1. Sedimentation Prototype Final |
...
Introduction
Methods
Initial Apparatus Setup
...
Report h2. Introduction h2. Methods h3. +Initial Apparatus Setup+ {float:left} !sed1.jpg|thumbnail! {float} The initial apparatus set up was run by Process Controller which had functions set in place for when the system would turn on, off, or drain. It also included a pressure sensor that would control the flow rate of the system. It was found that the pressure sensor was unreliable and sensitive to changes in the environment. Additionally, the flocculator for this setup led to a high velocity gradient (G) of 129.1/s. This led to the formation of very small flocs. |
...
New Apparatus Setup
Design Parameter
Equations
L/D
Vc
Straw Bundles
Type 1 Straws - 12mm
Type 2 Straws - 5mm
Type 3 Straws - 3mm
Results & Discussion
h3. +New Apparatus Setup+ !sed2.jpg|thumbnail! h3. +Design Parameter+ h3. +Equations+ h3. +L/D+ h3. +V{~}c~+ h3. +Straw Bundles+ !sed5.jpg|thumbnail! Type 1 Straws - 12mm !sed4.jpg|thumbnail! Type 2 Straws - 5mm !sed3.jpg|thumbnail! Type 3 Straws - 3mm h2. Results & Discussion h2. Conclusions |