...
2.4 Solve using FLUENT
At this stage, the turbulence model that was going to be used for modeling was set up. Standard k-ε was used as the turbulence model was set up. After this, water was defined as the working material was defined. Water was selected from the FLUENT database as working fluid. After defining operating conditions and making sure that the boundary conditions set in Gambit was were correct, the initial conditions were set up. Finally, the solution was obtained by iterating until the solution was converged. With the solution obtained, various results residuals converged to 10e-6. Results were then analyzed and plotted.
2.5 Mesh Sensitivity Analysis
...