Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Boundary Conditions / Forces

First, the we need to assign the center pole to the Force computation. Click Next Step > Fix > Force Computation. Select the center pole and click the +. Leave all other setting in default condition.

 

Now the current  condition for the stranded coil needs to be selected. First click Next Step > Add > Electromagnetic Conditions > Current. Click on the left side of the coil. Go down to the bottom left corner and click on the plane behind the front one. If the plane does not show up click on the other side of the coil. The selected plane is seen below.

 

Click the “+” next to cross-sectional face or body. Input 5 A for the Operating Current and 200 for the Number of Conductors.

...