Page History

...

The incompressible Navier-Stokes momentum and mass continuity for incompressible flow equations are used as the governing equations for this flow. The modified Navier-Stokes and mass continuity equations are as follows, respectively.

ut+(u∇)u= -1∇+u

∇u=0Image Added

A few words on the  formatting on the following instructions:

...

We are now ready to begin simulating in ANSYS AIM. Open ANSYS AIM by going to Start > All Apps > ANSYS 18.1 > ANSYS AIM 18.1. Once you are at the starting page of AIM select the Fluid Flow template in the top as shown below.

You will be prompted by the Fluid Flow Template to either Define new geometry, Import geometry file, or connect to active CAD session. Select Import geometry file and press Next.

Go to Step 2: Geometry

Go to all (ANSYS or FLUENT) Learning Modules