Include Page |
---|
| Plane Frame - Panel |
---|
| Plane Frame - Panel |
---|
|
Include Page |
---|
| ANSYS Google Analytics |
---|
| ANSYS Google Analytics |
---|
|
Mesh
Double Click on "Model",
, in order to start Mechanical .
At this point the number of elements along each line segment will be specified. First right click on the "Mesh" tab,
, then click "Insert" and finally click "Sizing" as shown below.
![](/download/attachments/127118947/InsertMeshSizing_350.png?version=1&modificationDate=1287691543000&api=v2)
Next, click on the "Edge Selection" button,
. Now hold down control and click on all six line segments. All the lines should now be highlighted in a light green color. Now, click the "Apply" button which will be located within the "Details of Edge Sizing" table. Now, change the "Type" to "Number of Divisions" as shown below.
![](/download/attachments/127118947/MeshSizing_350.png?version=1&modificationDate=1287691997000&api=v2)
Set "Number of Divisions" to 1 and click update,
, to generate the mesh. Expand "Mesh",
, and then click on "Edge Sizing",
. You should now see an image similar to the one below.
![](/download/attachments/127118947/RenderedMesh_350.png?version=1&modificationDate=1287764123000&api=v2)
The single yellow bar on each line segment conveys that there is only one element per line segment.
Go to Step 4: Physics Setup
Go to all ANSYS Learning Modules