...

Creating the Geometry for the Bolted Nozzle Flange

Created using ANSYS 16.2

Learning Goals

In this tutorial, you will learn to:

• (e.g.: Determine the displacements and stresses in a bike crank using 3D FEA capabilities in ANSYS Mechanical)
• (e.g.: Verify the finite-element results from ANSYS by refining the mesh and also comparing with hand calculations)

Problem Specification

...

how to create the geometry used for the Bolted Nozzle Flange problem, presented in Module 3 of the Cornell's Engineering Simulations MOOC on edx.org. (LINK)

Problem Specification

Go to Step 1: Pre-Analysis & Start-Up

...