...
We notice that the flow accelerates due to the heating. As air is heated, its density decreases. So the velocity has to increase to maintain the same mass flow rate.
Temperature Profiles
Similarly, one can look at the temperature profiles before and after the heated section.
Duplicate the Axial Velocity Profiles chart by right-clicking on the plot name in the "tree" on the upper left. Rename it as "Temperature Profiles".
Double-click on "Temperature Profiles" in the tree view to edit its properties. This should be just below "Axial Velocity Profiles" in the list.
Change the title and x-axis variable (to Temperature). Click Apply. Here's what we get.
This plot shows that:
- the temperature increases in the heated section
- the temperature is much higher near the wall in the heated section
- the temperature is nearly uniform at the end of the mixing section
All these trends are as expected.
Mixed Mean and Wall Temperatures
...